Fluke 1560 Black Stack User Manual

6.5.4 Probe Commands
This group of commands deals with temperature conversion and probe charac
-
terization. The commands are summarized in Table 13. None of the probe pa
-
rameters are affected by the *RST command.
Command Action
CALCulate[n]:CONVert:CATalog? Query available conversion types
CALCulate[n]:CONVert:COPY <channel>annel Copy conversion parameters from another channel
CALCulate[n]:CONVert:DATA? Query output of conversion block
CALCulate[n]:CONVert:NAME <convert_name> Select the conversion type
CALCulate[n]:CONVert:NAME? Query the conversion type
CALCulate[n]:CONVert:PARameter:CATalog? Query a list of conversion parameters
CALCulate[n]:CONVert:PARameter:VALue
<parameter_name>,<numeric_value>
(;<parameter_name>,<numeric_value>...)
Set conversion parameter values
CALCulate[n]:CONVert:PARameter:VALue?
<parameter_name>
Query the value of a conversion parameter
CALCulate[n]:CONVert:PARameter:VALue? ALL Query the values of all conversion parameters
CALCulate[n]:CONVert:SNUMber <serial_number> Set the probe serial number
CALCulate[n]:CONVert:SNUMber? Query the probe serial number
CALCulate[n]:CONVert:SRLow
<sub-range_number>
Select a low ITS-90 sub-range
CALCulate[n]:CONVert:SRLow? Query the low ITS-90 sub-range
CALCulate[n]:CONVert:SRHigh
<sub-range_number>
Select a high ITS-90 sub-range
CALCulate[n]:CONVert:SRHigh? Query the high ITS-90 sub-range
CALCulate[n]:CONVert:TEST? <numeric_parame
-
ter>
(,<numeric_parameter>)
Test the conversion calculation
81
6 Digital Communications Interface
Commands
Table 13 Probe Command Summary

Fluke 1560 Black Stack Specifications

General

Brand	Fluke
Model	1560 Black Stack
Category	Thermometer
Language	English