8060A
Instruction Manual
2-8
Table 2-1. Controls, Indicators and Connectors (cont)
Item
No.
Name Function
10 Tilt Bail A fold-out stand. The bail may also be
removed (press on one of the legs at the
hinge of the bail) and reinserted from the top
as a hook for hanging the instrument.
11 Power Switch Slide switch for turning instrument on or off.
12 Display 4½ digit LCD display (19999 maximum) with
decimal point, minus sign, over-range, Hz,
dB, continuity and relative indicators.
2-7. Display
The 8060A provides measurement results on the 4½ digit LCD display (refer
to Figure 2-4 or your instrument). The decimal point is placed automatically.
Symbols in the upper portion of the display indicate when one of the
secondary functions is enabled. The unit for the autoranging frequency
measurement is displayed automatically as Hz or kHz. The units for all the
other measurements are indicated by the range switch that is pushed in.
Leading zeros are not displayed.
Relative
Function
in Use
Audible
Continuity
Enabled
Visible Continuity
Enabled
dB Function in Use
Frequency Unit
(Hz or kHz)
Low Battery
Indicator
Continuity
Indicator
dx06f.eps
Figure 2-4. 8060A Display
To Next Page
Loading...
