Fluke 9100A - Summary of EXEC Key Usage

SUMMARY OF EXEC KEY USE
5.2. .-
The EXEC key is used to execute previously written test
programs. To use the EXEC key:
l
l
Remove the UUT microprocessor or disable it.
Connect the pod to the UUT.
Press the EXEC key and use the left arrow key to move
the cursor to the left-most field.
Type the UUT directory name into the left-most field.
Move the cursor to the next field and type the program
name.
Press the ENTER key.
Follow any displayed instructions, and note any
information from failed tests. The information will be
helpful when troubleshooting a faulty UUT.
-
5-4