5.
Move the cursor to the next field and press the
DRl
softkey
to specify Drive 1.
6.
Press the ENTER key to format the disk in Drive 1.
DUPLICATING A USER DISK B.2.
Duplicating a User Disk
Using a 91
OOA/9105A
8.2.1.
If the disk to receive the copy has not been formatted, follow the
instructions in Appendix B, Section B.l, “Formatting a Disk”
prior to the following procedure.
The following procedure uses a sector to sector copy method.
This method of copying deletes all files which are on the
destination disk.
1.
Place the user disk (the one you wish to copy) in
Drive 1.
2. Press the MAIN MEND key and use the left arrow
key to move the cursor to the left-most field.
3.
Press the SOFT KEYS key to display additional
softkey
labels and then press the COPY
softkey.
4. Press the right arrow key once and then press the
DR 1
softkey.
5.
Press the right arrow key once and then press the
DRl
softkey
again. The display should now read:
MAIN: COPY DISK FROM
DRl
TO
DRl
-
-
6.
Press the ENTER key.
B-2
To Next Page
Loading...
