HOW TO ENTER A COMMAND
2.3.
Here is an example of how to enter commands that select a disk
drive and execute a program from the selected drive.
1.
If the
9100A/9105A
is not already on,
power-up the system as described in Section 1.1
or 1.2.
2.
Insert your user disk into the disk drive at the
side of the system.
If your system is a
9105A,
insert the user disk into
Drive 2, the lower drive.
If your system is a
91OOA,
your files may be stored
on the internal hard disk; if so, you may omit this
step.
2-5
To Next Page
Loading...
