Fluke 9100A - Page 64

To erase the GFI summary and suggestion list:
0
Press the GFI key and use the left arrow key to move the
cursor to the left-most field.
l
Press the CLEAR softkey.
l
Press the ENTER key.
To make GFI start automatically:
l
Press the GFI key and use the left arrow key to move the
cursor to the left-most field.
l
Press the SETUP softkey and use the right arrow key to
move the cursor to the right-most field.
l
Press the ENABLE softkey. GFI starts automatically after
a TL/l program that generates GFI hints is executed.
l
Press the ENTER key.
-
6-14