Fluke 93 - Page 83

4-14
PERFORMANCE VERIFICATION
PROCEDURE
Test equipment:
Fluke 51
006 Calibrator
Test
setup:
ScQp«M«ter
Procedure/requirements
for resi^nce
function accuracy test:
A Set the Fluke
5100B to 1 0Oa
B
Check that the readout is between
99.00... 1 01 .OCl
C Set the Fluke 510OB to
10
Ma
D Check that the readout Is
between 9.900...10.10 MO.
4. Diode test accuracy
This test checks the
accuracy of the Diode test function.
Test equipment:
Fluke
51006 Calibrator
Test setup:
SccwMeter