Fluke CableAnalyzer DSP-4000 Series User Manual

DSP-4000 Series
Users Manual
B-12
Changing the Numeric Formats in Your Project
To change the length units and the date, time, and number formats in your project,
use the
Display selection from the Options menu.
Adding Plots to Printed Reports
If a DSP-4100 test tool’s STORE PLOT DATA setting was enabled during testing,
you can add plots to printed reports.
To add plots to printed reports choose
Printing from the Options menu; then
select
Use Graphical Reports for DSP-4100 results. Printed reports will show
the test data in both tables and plots.
When
Use Graphical Reports for DSP-4100 results is not selected, data is
shown in tabular format only. To see what a graphical or tabular report will look
like for a report selected in the summary list, choose
Print Preview from the File
menu on the main CableManager toolbar.
Figures B-4 and B-5 show examples of Autotest reports in tabular and graphical
format.

Fluke CableAnalyzer DSP-4000 Series Specifications

General

Brand	Fluke
Model	CableAnalyzer DSP-4000 Series
Category	Measuring Instruments
Language	English