37
⇒ After you have entered a useful name for the
report press Select and navigate to and select
Save Report or Delete Report.
⇒ After you save reports (up to 10 can be stored on
the NetTool), you can then use NetTool Toolkit to
upload, view, or print the reports. NetTool Toolkit
enables you to view saved reports or generate
new “live” reports as long as your NetTool is
properly connected to the PC.
⇒ From the Report list you can delete all reports in
the list (Delete All Reports).
⇒ To delete a single report, select the report name
from the list and then select (Delete Report).
⇒ You can also overwrite a report which updates the
data contained in the report. Select the report you
wish to overwrite and then select Overwrite
Report.
Note
If you inadvertently give two reports the same
name on NetTool, check the date/time stamp
when you view the report to differentiate
between them.
To Next Page
Loading...
