FOM INDUSTRIE BLITZ - Page 29

23
BLITZ
G BG B
G BG B
G B
5.3.2 INSTALLING THE CONSOLE
Proceed as follows:
- Remove the 2 lower fixing screws ‘A’ - Fig. 05-04.
- Manually rotate the console to the working position.
- Tighten the 2 lower fixing screws ‘A’ - Fig. 05-05 and use the 2 upper screws ‘B’ - Fig. 05-05 to adjust the
height of the console.
- Fix the upper plate ‘C’ - Fig. 05-05 using the 4 fixing screws.
05-04
A
05-05
B
C
A
A
B