Soloing
VM200 User’s Guide
103
7.
When you’re ready, press the
[SOLO]
key for the channel(s) you
wish to solo.
The selected
[SOLO]
keys light up.
Note:
Solo channels take priority over the sources you select using the
Mon Sel parameter.
Note:
When channels are configured as stereo pairs (“Pairing Channels”
on page 68), their [SOLO] keys are linked.
Note:
If Solo Mode is set to M-SOLO, you must raise the fader for the
soloed channel and the Master fader or you will not hear any output.
To Next Page
Loading...
