Foxpro X24 - Playing Sounds

12
Setting the Clock:
Access the Date/Time(r) menu and select “Time.” Use the scroll buttons
to set the current time. Push “Play/Select” to lock it in. The clock can be
displayed in either the standard 12-hour format or 24-hour format
(military time).
The X24 remote control features a moon phase indicator. To display the
correct moon phase, it is imperative that you enter the correct date.
Otherwise, the displayed information may not be correct.
Setting the Date:
Access the Date/Time(r) menu and select “Date.” By default, the first
option is the month. Use the scroll buttons to select the current month
and then push the “Play/Select” button. Next you set the day using the
same method described above, and then push “Play/Select”. Finally, set
the year and push “Play/Select” to lock it in.
Configuring Date Format:
Access the Date/Time(r) menu and select “Date Format.” Use the scroll
buttons to cycle through the options. When your desired date format is
shown, push “Play/Select” to lock it in.
3-3 Playing Sounds
Make sure that you have properly installed the battery pack the X24
and batteries in the X24 remote as described in Chapter 1. The X24
remote control is not intended to operate the caller at distances shorter
than 1 meter (3 feet). If the remote is located too close to the caller,
proper operation cannot be ensured.
1. Turn on the X24 by placing the power switch in the “on”
position.