24
and select the FOX FEATURES item. Select FOXMOTION and change it to
“on.” Then select the Rate item directly beneath it to adjust the speed
that FOXMOTION operates at.
6-2 FOXBANG
When activated, FOXBANG reacts to the report of a firearm by
automatically switching to an assigned function established within the
X24 remote. There are 8 different settings for FOXBANG. The available
functions you can link to FOXBANG activation include: FOXDATA, mute
(toggles mute on/off), auxiliary (toggles auxiliary device on/off), preset
1, preset 2, preset 3, preset 4, and preset 5. When FOXBANG is
triggered, it will create a new record within your FOXDATA in addition
to performing the specified action.
To Activate FOXBANG and Assign a Function:
Access the FOX FEATURES menu on the X24 remote and locate
FOXBANG. Cycle through the available options from “Off” to the desired
function you would like FOXBANG to be linked to. When the desired
function is selected, push the “Play/Select” button to lock it in.
As the remote control has an internal sensor that senses when your
firearm has been discharged, it is important to make sure that you have
the correct sensitivity level set for your firearm. There are 3 sensitivity
levels that you can choose from: Low, Medium, and High. The lower
sensitivity setting should be used with higher caliber firearms such as a
.30 and higher. High sensitivity should be used for smaller calibers such
as .17 to .22. Everything else should work fine with the medium setting.
Setting the Sensitivity:
Access the FOX FEATURES menu on the X24 remote and locate
FOXBANG. Select FOXBANG Sen. and use the scroll buttons to cycle
through the available sensitivity options. When the sensitivity level has
been set, push “Play/Select” to lock it in.
To Next Page
Loading...
