30
left channels play through the internal speaker while the right channel
plays through the external speaker. Reverse stereo flip-flops the left
and right audio channels. Mono mode results in left/right channels
being condensed so that the same sounds play through all speakers at
the same time.
Note: Reverse Stereo Mode only works with .24B sound files
7-4 Main Speaker
Provides you access to turn the internal speaker on and off.
7-5 Ext. Speaker
Provides you access to turn the external speaker on and off.
7-6 Audio Limiter
This setting will allow you to turn the audio limiter on or off. The audio
limiter is designed to limit the maximum volume of the caller to
maximize the battery life of the caller. This is useful in situations where
you may be hunting in areas where less than total volume is sufficient,
and you want to conserve your battery. Once you highlight the “Audio
Limiter” menu option, press the “Select” button and toggle between
your choices of “On” or “Off.” Press the “Select” button a final time to
set it. Note: Early versions of the X24 do not have this feature
included.
7-7 Preset Mute Override
During normal operation, if the X24 is muted and you play a preset, the
preset is queued for playback, but it cannot be heard until the caller is
un-muted. Preset mute override will take care of this and eliminate the
need for un-muting the call upon preset activation. It works by initially
checking to see if mute is active and, if it is, un-mute the unit while
playing the preset sound. This is especially important for FOXBANG
operation. By having preset mute override turned on, FOXBANG
To Next Page
Loading...
