18
Remember, if you change the channel of operation of the X24, you
must also change the channel of operation for the TX1000. See Section
9-1 for more information.
5. X24 Remote Control Detailed Overview
This chapter provides a more detailed oriented overview of the X24
remote. The model number for the X24 Remote is “TX1000”. In this
manual, we tend to refer to the remote as “X24 Remote”, but you will
encounter “TX1000” later as it referenced in specific menu options. The
X24 remote control is not intended to operate the caller at distances
shorter than 1 meter (3 feet). If the remote is located too close to the
caller, proper operation cannot be ensured.
5-1 What are FOX FEATURES?
Throughout this section, you will encounter various features referred to
as “Fox Features”. This group of features includes: FOXBANG, FOXCAST,
FOXMOTION, FOXGRIP, and FOXDATA. These features are explained
thoroughly in this section.
5-2 Turning on the X24 Remote
After installing batteries as indicated in Chapter 1, you can turn on the
X24 remote by pushing and holding the power button for approximately
1-2 seconds. An initial startup screen will appear displaying the FOXPRO
logo and remote version information. After the initial startup sequence
is complete, the main sound selections screen will appear.
5-3 Navigating the X24 Remote
The X24 Remote has a scroll up and scroll down button for cycling
through the on-screen display. A selected menu item is highlighted by a
horizontal bar, and by pressing the scroll up or down arrow button, the
horizontal bar will move up or down through the menu list. To select a
menu item, push the “Play/Select” button. The “Back/Menu” button
To Next Page
Loading...
