34
10-2 AUX
The auxiliary jack operation specifications can be changed for either
momentary or latched. All FOXPRO Jack Predator Decoys require that
the jack be setup for momentary.
10-3 View
The X24 remote control can display your sounds either by general listing
or by category listing. Sound categories are the best route to go if you
have many sounds.
10-4 Temperature Units
The integrated thermometer can display temperature in either Celsius
or Fahrenheit based upon your preference.
10-5 Barometer Measurement Units
The X24 remote can display barometric pressure readings in either
inches or millimeters depending upon your preference.
10-6 Elevation
Barometric pressure is the reading provided by a barometer in
measuring atmospheric air pressure. The pressure is not constant, but
changes depending upon altitude and weather conditions. To get the
most accurate measurements with your X24 remote, it is recommended
that you set the elevation value for your location. Atmospheric pressure
is the greatest at sea level as compared to higher altitudes. To get the
best calculation, knowing your approximate elevation will greatly
increase the accuracy.
To set the elevation, access the TX1000 Settings menu and select
“Elevation”. Cycle through the options until you find the closest match
for your location. When the appropriate value is displayed, push the
“Play/Select” button to lock it in.
To Next Page
Loading...
