21
• MT: Mute status indicator. When the sound is muted, a letter M
will appear. When a FOXFUSION sound is active, the M/M
display may appear according to how the MUTE / Pause control
has been applied. See the FOXFUSION section for more
information.
• VOL: Volume level indicator. Ranges 0 – 40.
• BATT: Battery level indicator.
• TIME(R): Displays either stand timer or real-time clock. When an
alarm is indicated, the background will blink red.
5-5 Access the X24 Remote Configuration Menu
From the main sounds screen, push the “Back/Menu” button a single
time. This will allow you to access the configurations screen. There are a
total of five elements that appear on this menu: FOX FEATURES, Sound
Settings, Display/Power, Date/Time(r), and TX1000 settings.
5-6 Playing Sounds with the X24 Remote
The first operation that most users want to perform is playing sounds.
There are multiple methods in which you can initiate sound playback.
Before attempting to play sounds, be sure that the X24 and X24 remote
both have fresh batteries installed and that both devices are powered
on.
There are two sound view mode options within the X24 remote: Sound
List and Categories. This is configured through the TX1000 Settings item
in the main menu. The method of playing a sound is identical for both
modes; the way the sounds are displayed on the screen is the only
difference. By default, the X24 remote is set up to display the sounds by
categories.
To change how the sounds are displayed, access the TX1000 Settings
menu and locate the menu item titled “View”. Highlight “View” and
then push the “Play/Select” button a single time. Use the scroll buttons
To Next Page
Loading...
