38
13. Creating FOXCAST Sequence Files
This section will provide you with detailed information on creating and
installing FOXCAST sequence files in your X24 digital game caller.
13-1 Creating FOXCAST Sequences Manually
This process requires some basic computer operations experience. If
you are not very experienced with computers, it is recommended that
you seek help prior to taking any of the following steps. A FOXCAST
sequence file is a simple text-based file that contains unique
instructions to guide your X24 through a stand. These instructions
include commands to change the sound, change the volume level, enter
a passage of silence, and so forth. Here is a chart showing all the
various command possibilities:
S 0 – 999 Denotes numerical value of sound on unit
V 0 – 40 Denotes numerical value of volume level
P 1 - 99999 Denotes pause value in seconds (approx.)
M 0 – 4 FOXMOTION and speed parameter
D 1 or 0 1= activate decoy, 0= deactivate decoy
J n/a Denotes Jukebox Mode for this FOXCAST File
R n/a Denotes Repeat Mode for this FOXCAST File
Q n/a Denotes Single Play Mode for this FOXCAST File
A typical FOXCAST sequence file may look something like the following
example:
To Next Page
Loading...
