F3D3 Series Service Manual Factory Level 3 Parameter Access / 1.11.1
Questions? Call Franke Technical Support Group For Your Area. Copyright 2012 Franke, Inc. All rights reserved.
Factory Level 3 - Parameter Guide – Page 2
[For Latest Models with BL 2.00; APP 2.12a Chip Software
1)
]
Time the basket must remain
out before enabling dispense
Prevents Low Product Warning
Enables high accuracy (but
slower) dispense for Japan.
50 100 % 90 Reserved - Do not adjust.
Reserved - Do not adjust.
P23
Small Fill Pct
50 100 % 88 Reserved - Do not adjust.
If Dual Language is enabled,
this sets toggle rate: (1 = Off,
2 = Slow, 3 = Med, 4 = Fast)
Temperature Display Units
Celsius or Fahrenheit
Displays numeric codes with
English or numeric codes only
Factor
25 100 % 67
Weight of medium load as
percent of large load
67 67 67 67 67 67 80 67 67 67
Weight of small load as percent
must be 0-9, S, ‘.’ or ‘-‘. All others: 0-9, ‘-‘ or ‘.’
15 characters maximum. All characters: 0-9 or ‘-‘
Exit
Exits Level 3, if Entered
NOTES: 1) No Main Board Chip Label. Software Vers(ion): BL 2.00; APP 2.12a appears on Lane
Display. [How is this called up?]
2) Country Exceptions Abbreviations: US = North America; EU = Europe; JP = Japan; LA = Latin
America (South & Central); CN = Canada; AP = Asia, Pacific, Middle East & Australia
3) Unit Abbreviation: mS = Milliseconds