Freenove ESP32 - Chapter 13 BLE

Need support?  support@freenove.com
124
Chapter 13 BLE
www.freenove.com █
Chapter 13 BLE
If you have any concerns, please feel free to contact us via support@freenove.com
Sketch
Open “Sketch_08_BLE” folder in “Freenove_Robot_Dog_Kit_for_ESP32\Sketches” and then double-click
“Sketch_08_BLE.ino”.
Sketch_08_BLE
Upload the code to esp32. Open the serial monitor and set the baud rate to 115200. Connect the mobile
APP to the robot dog, and you can see all the commands sent by the mobile terminal on the serial monitor.