Freenove ESP32 User Manual

Need support?  support@freenove.com
48
Chapter 2 Robot Assembly
www.freenove.com █
2. Assemble the servos to the acrylic parts with black screws in servo packages.
Assemble them as close to 90 degrees as possible. Angles at 70 – 110 degrees are acceptable.
Repeat the above step to make two same left legs.
3. Similar to the above steps, assemble two right legs.
Black screw
90 degrees

Freenove ESP32 Specifications

General

Brand	Freenove
Model	ESP32
Category	Computer Hardware
Language	English