See Fig. 1.2 for a typical component GWR label.
Emissions Labels
Aftertreatment System Indicators
Label
Engines and vehicles manufactured after December
31, 2006 and domiciled in the U.S. or Canada are
required to meet all EPA regulations effective as of
the vehicle build date, and are equipped with an
emission aftertreatment system (ATS). Vehicles do-
miciled outside of the U.S. and Canada may not
have aftertreatment equipment, depending upon local
statutory emissions guidelines. See
Table 1.1.
A warning label on the driver-side visor contains im-
portant warning indicators in the instrument cluster
that pertain to the ATS. See
Fig. 1.7.
It is a violation of U.S. federal law to alter exhaust
plumbing, ATS, or other components in any way that
would bring the engine/vehicle out of compliance with
certification requirements [Ref: 42 U.S.C. S7522(a)
(3)]. It is the owner’s responsibility to maintain the
vehicle so that it conforms to EPA regulations.
02/20/2012 f080177
Fig. 1.3, Vehicle Certification Label
02/28/2012 f080182
1
2
1. EPA Noise Emission Control Label
2. FMVSS Certification Label
Fig. 1.4, Label Locations
f080180
02/28/2012
Fig. 1.5, Incomplete Vehicle Certification Label
f080024
10/10/2006
Fig. 1.6, Canadian National Safety Mark
Vehicle Identification
1.2
To Next Page
Loading...
