12
General: Network Installation
Connecting the Antenna Module
• Screw the Antenna onto the Wireless Receiver;
• Connect the Wireless Receiver to the Server using the supplied USB cable;
• Affix the Wireless Receiver to the wall with double sided adhesive tape;
• Orient the antenna to be pointing upwards to the closest room in which a
Verdant thermostat will be installed.
THE WIRELESS RECEIVER MUST BE INSTALLED WITHIN 100FT FROM THE FIRST 2
TO 3 THERMOSTATS.
THE WIRELESS RECEIVER AND THE ANTENNA MUST NOT BE INSTALLED NEAR
LARGE METAL STRUCTURES OR SURFACES.
METAL STRUCTURES AND SURFACES SIGNIFICANTLY REDUCE THE RANGE OF THE
WIRELESS SIGNAL.
To Next Page
Loading...
