Friedrich DSSXEMWRT3 - Setting the Mesh ID

25
General: Thermostat Configuration
Setting the MESH ID
For networked installations, a unique MESH ID is associated to each Online
Connection Kit and is provided by your technical support agent during the
installation training (can also be found labeled on the device).
For properties using a single Online Connection Kit, each thermostat may be linked
to MESH ID 0001.
For properties requiring multiple Online Connection Kits, each thermostat should be
linked to the MESH ID of the Online Connection Kit closest to it.
• Press the FAN button to advance to the next digit;
• Press the UP and DOWN buttons to increase or decrease the value;
• Press the F|C button to advance to the next step.
NOTE:
• Press the UP and DOWN button to change the values
• Press the FAN button to navigate from left to right