Friedrich DSSXEMWRT3 - Installing the HVAC Controller for Freshaire PTAC Unit

45
Installing the HVAC Controller for FreshAire PTAC Unit
➤ Power Off the HVAC Unit;
➤ Mount the wireless HVAC Controller on the top of the indoor HVAC unit;
➤ Connect the one end of the supplied wire harness to the J4 port on the HVAC
Controller;
➤ Insert one of the supplied jumpers* into function selection pins 1-2, and 4-5 of
J5 of the wireless HVAC controller.
➤
➤
➤
➤
➤
➤
➤ Connect the J4 harness into the J4 port on the right side of the wireless
controller.
➤ Insert the 2 provided jumpers into pin terminals 1-2 and 4-5 of the J5 port.
➤
➤
FreshAire PTAC: Unit Specific Installations
➤ * a jumper has the following appearance