21
Mounting a Remote Wireless Sensor (Optional)
• Select the appropriate installation location for the external sensor, taking into
account the following;
• With the faceplate removed, place the sensor on the wall in the installation
location and mark location for drilling holes for the two (2) mounting screws;
• Drill two (2) 3/16” holes in the wall and insert the two (2) supplied wall
anchors;
• Use the two (2) supplied screws to securely mount the sensor to the wall;
• Insert one (1) AAA battery into the compartment (not supplied - wireless
sensors only)
OCCUPANCY SENSORS SHOULD FACE THE DESIRED OCCUPANCY
DETECTION AREA.
General: Sensor Installation
To Next Page
Loading...
