Friedrich DSSXEMWRT3 - General: Configuration & Managing Accessories; Activating a Sensor

General: Configuring & Managing Accessories
32
Activating a Sensor
• Remove the faceplate from the thermostat and the sensor(s) to be paired in
the room;
• Insert two (2) AAA-cell battery into each sensor (not supplied);
• Press the button inside the sensor to make the sensor discoverable;
• Move to the next step “Pairing a Sensor”
NOTE: The sensor(s) will remain discoverable for ve (5) minutes after pressing
the button inside the device. If the pairing process has not been completed
within ve (5) minutes of making sensor(s) discoverable, repeat this step.