Friedrich DSSXEMWRT3 - Automatic Humidity Control

76
General: Custom Energy Savings Settings
24 – AUTOMATIC HUMIDITY CONTROL
†
00 * Disable automatic humidity control;
01 Enable automatic humidity control;
When “Automatic Humidity Control” is enabled , thermostat will turn on
air conditioning in an unoccupied room when humidity raises above 60%
and room temperature is above 72°F until either room humidity is below
55% or room temperature is below 72°F ;
* Indicates default setting;
†
This setting is active only on thermostats with enabled humidity
features. Changing this setting on a non-humidity thermostat will have
no effect on thermostat operation.
Humidity features can be enabled on compatible thermostats via online
management.
Certain models only. Additional fees apply.