64
General: Custom Energy Savings Settings
12 – TEMPERATURE SETBACK DELAY
00-120 (20* default setting) Select the time delay (in minutes) for which the
room that is in the guest occupancy mode needs to be unoccupied
before the temperature setback is initiated.
This feature prevents initiating temperature setback prematurely while
the guest is still in the room but in an area where occupancy cannot be
detected by the occupancy sensor.
Setting the “Temperature Setback Delay - Heat” to “00”, disables the
setback in the heat mode. Set to “00” to disable EMS.
To Next Page
Loading...
