SANITISING FIXED PARTS
While the removable parts soak in the sanitizer
inside the tub, proceed sanitising the fixed parts
of the machine:
SANITISING THE CYLINDER
• Immerse a disposable paper cloth in the
sanitising liquid.
• Pass the cloth over all the cylinder surfaces.
• Also pass the cloth over the outer edge of the
cylinder until reaching the surfaces of the front
panel and bib.
- Never use any type of solvents and/or thinners to preserve the plastic parts and
gaskets during washing.
- Chemical sanitising products must be used in compliance with standards in force and
with the utmost caution.
- During sanitising operations, do not touch parts with tissues, sponges, rags or any
other non-sterile material.
To Next Page
Loading...
