1 Safety
1.1 Explanation of symbols
Safety information
Safety information in these instructions is indicated by symbols. The safety information
is preceded by signal words which reflect the extent of the risk.
DANGER
This symbol and signal word combination indicates a hazardous situation which
will lead to death or serious injury if it is not avoided.
WARNING
This symbol and signal word combination indicates a hazardous situation which
could lead to death or serious injury if it is not avoided.
CAUTION
This symbol and signal word combination indicates a hazardous situation which
could lead to slight or minor injuries if it is not avoided.
NOTICE
This signal word indicates important, but not safety-related information e.g.
damage to property or pollution
Safety information in operating instructions
Safety information can refer to certain, individual operating instructions. To avoid
disrupting the flow of the text when you are performing the action, this safety
information is not incorporated in the operating instruction. The signal words set out
above are used.
Example:
❒ Undo screw
❒ CAUTION! Pinching hazard at cover
Take care when closing the cover.
❒ Tighten the screw
Safety
1
Explanation of symbols
Montageanleitung S3 Turbo | M1870119_en-us 5
To Next Page
Loading...
Need help?
General