Fronius Robacta Reamer - Scope of Supply, Options, and Transport Guidelines

18
Scope of supply
NOTE!
The brush head is not part of the scope
of supply.
(1) Robacta Reamer brush head clea-
ning device for aluminium applica-
tions
(2) Spatter tray retainer
(3) Spatter tray
(4) Tightening key for cleaning motor
(5) Compressed air relief valve
Not shown:
(6) Harting Han6P connecting plug (X1) without cable
(7) Operating instructions
(8) Fixings for assembling the cleaning device:
- 4 screws
- 4 washers
- 4 lock washers
- 4 nuts
Options The following options are available for the cleaning device:
- Installation stand
- Wire cutter
Warning notices
on the cleaning
device
NOTE!
The cleaning device is fitted with warning notices and a rating plate.
The warning notices and rating plate must not be removed or painted over.
(1)
(2)
(3)
(4)
(5)