Fronius Robacta Reamer - Torch Cleaning Position; Cleaning Position of the Welding Torch - Standard Brush Head; Cleaning Position of the Welding Torch - Braze+ Brush Head

38
Torch cleaning position
Cleaning posi-
tion of the weld-
ing torch -
standard brush
head
- End of gas nozzle is approx. 45 mm
(1.77 in.) beneath upper edge of clea-
ning device housing, positioned cent-
rally with respect to the cleaning motor
Cleaning posi-
tion of the weld-
ing torch - Braze+
brush head
- End of gas nozzle is approx. 90 mm
(3.54 in.) beneath upper edge of clea-
ning device housing, positioned cent-
rally with respect to the cleaning motor
45 mm
1.77 inch