58
Changing the
round brush
NOTE!
In the process described below for changing the round brush, a standard brush
head is shown.
The process is identical for aBraze+ brush head.
NOTE!
Before changing the brush, note the setting of the brush head (A or B) and be sure
to use this setting during assembly.
This will ensure that the correct clearance is maintained between the diagonal brushes af-
ter the brush has been changed.
Remove the protective covering from the cleaning device
7 8
9 10
Fit the protective covering to the cleaning device in its original position
1
2 3
4 5
6
To Next Page
Loading...
