Fronius Selectiva Series User Manual

21
EN
If the wall bracket bar (2) is not required,
store it on the rear of device and secure it
using wing nuts (7).
Alternatively, the wall bracket bar (2) can
also be stored on the right-hand side of the
device. It is secured using TX25 screws (8)
and a tightening torque of 3 Nm.
(7)(2)(7)
(8) (8) (2)

Fronius Selectiva Series Specifications

General

Device Category	Battery Charger
Manufacturer	Fronius
Series	Selectiva
Microprocessor Controlled	Yes
Battery Types	Lead-acid, AGM, Gel
Protection Class	IP20
Protection Features	Reverse polarity, short circuit, overvoltage, overtemperature
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	12/24 V DC