Fitting the torch body and connecting the welding
torch
Fitting the torch
body
NOTE!
Risk due to damaged O-ring on the torch body.
A damaged O-ring on the torch body can lead to contamination of the shielding gas, re-
sulting in a defective weld.
▶
Before each start-up, ensure that the O-ring on the torch body is undamaged.
1
* Grease the O-ring on the torch body
2
Push the torch body locking device fully back and at the same time turn the torch body 180°
3
67
EN-US
To Next Page
Loading...
