WARNING!
Danger of slipping due to overflowing coolant container. If using a MultiControl
cooling unit, be aware that an overfilled coolant container can overflow when em-
ptying hosepacks longer than 4 m (13 ft. 1.48 in.).
This can result in severe personal injury and damage to property.
▶
Follow the instructions for filling the torch hosepack in the cooling unit operating inst-
ructions.
CAUTION!
Risk of damage from operation without sufficient coolant.
This can result in damage to property.
▶
As soon as a good return flow is visible in the coolant container of the cooling unit
after starting up the power source, ensure that there is sufficient coolant in the coo-
ling unit.
Connecting the
gas-cooled exten-
sion hosepack
The extension hosepack comes with a protective bag in which the interface connecting
the extension hosepack to the torch hosepack is placed.
NOTE!
When carrying out the work described
below, ensure that the cables and ho-
ses are not kinked, pinched, abraded or
otherwise damaged.
NOTE!
Risk due to damaged O-ring on the torch body.
A damaged O-ring on the torch body can lead to contamination of the shielding gas, re-
sulting in a defective weld.
▶
Before each start-up, ensure that the O-ring on the torch body is undamaged.
74
To Next Page
Loading...
