19 Appendix
482
ESC/P Mode Menu Items
The following tables show the basic and extended settings that can be configured on the
ESC/P emulation mode menu.
Basic Settings
Setting Item Item
Number
Value
Output color 5 [0](Default): Color
[1]: Monochrome
Paper tray 3 [0]: Auto
[1] (Default): Tray 1
[2]: Tray 2
[3]: Tray 3
[4]: Tray 4
[5]: Tray 5
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1 Tray 2 Tray 3
Tray 4 . If paper of the same size is loaded in multiple trays but in different
orientations, feeding of the paper loaded in the landscape orientation is prioritized.
Document size 1 [99](Default): Paper
[100]: Continuous form paper (10x12")
[101]: Continuous form paper (10x11")
[102]: Continuous form paper (15x12")
[103]: Continuous form paper (15x11")
[3]: A3
[4]: A4
[5]: A5
[14]: B4
[15]: B5
[21]: 8.5 x 14"
[22]: 8.5 x 13"
[23]: 8.5 x 11"
[24]: 11 x 17"
[0]: Postcard
When a continuous form paper is selected for [Original Size], [Paper Position]
cannot be set.
When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the device
automatically calculates the magnification based on a combination of [Original
Size] and [Paper Size]. If the ratio, however, is outside the range of 45-210%, the
document will not be reduced/ enlarged, and will be printed at a scale of 100%.
When [2 Up] is selected, the device automatically calculates the magnification
based on a combination of [Original Size] and 1/2 of [Paper Size].
Orientation 19 [0](Default): Portrait
[1]: Landscape
The orientation set here is that of the document. It is not affected by the
orientation of paper loaded in the paper trays.
To Next Page
Loading...
Need help?
General
