1 Before Using the Device
16
Do not insert any object into slots or openings of this product.
Do not put any of the followings on the product:
z
Liquid container such as flower vases or coffee cups
z
Metal parts such as staples or clips
z
Heavy objects
If liquid is spilled over or metal parts are slipped into the product, it may cause
electric shock or a fire accident.
Do not place liquid, particles, small metal pieces or their containers in the
consumable storage spaces. Spills may cause electric shock or fire due to
shortcircuit.
Do not place dangerous objects (e.g., fragiles, volatile and flammable chemicals,
creatures) in the consuable storage spaces. Otherwise, it may cause catching fire.
Do not use conductive paper such as origami paper, carbonic paper or
conductively-coated paper. When paper jam occurs, it may cause short-circuit and
eventually a fire accident.
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never
use aerosol cleaners to avoid catching fire and explosion.
If you need to pull out a tray to remove paper jam, contact Fuji Xerox Customer
Support Center. Do not pull out a tray, otherwise it may cause injuries.
When you play the media (e.g., CD-ROM, DVD) supplied with the product, always
use said media-enabled device. Otherwise, large sound may damage its speakers
or your ears.
Laser Safety
CAUTION: Any operations or adjustments not stated in the operation manual
may cause hazardous light exposure and eventually burn injuries or loss of
eyesight.
This product has been tested and found to comply with the Class 1 Laser
Equipment requirements defined by the international standard IEC60825-
1:[2014] and has no light exposure hazard. The product has no hazardous light
emission as it features light protection components and covers to shut in all light
beam during operation and maintenance.
Laser Diode (inside ROS ASSY) : Class 3B
Wave length : 780nm (±10 nm)
Beam divergence
θ // : 15 deg (+2.5°/-2°)
θ ⊥ : 13deg (+3°/-2°)
Plus duration : CW
Repetition rate : CW
Maximum power : 30.6 mW
Keep electrical and mechanical safety interlocks active. Keep the safety interlocks
away from magnetic materials. Magnetic materials may accidentally activate the
product and cause injuries or electric shock.
To Next Page
Loading...
Need help?
General
