Machine Components
41
Product Overview
2
îš„Duplex automatic document feeder (optional)
3 Drum cartridges
(R1 (Black), R2 (Cyan), R3
(Magenta), R4 (Yellow))
Contains photoconductors and development units.
Drum cartridges are arranged in order R1 (Black), R2 (Cyan), R3
(Magenta), R4 (Yellow) from the left as you face the machine.
Important • The drum cartridge is always marked with R1, R2, R3, or R4. Make
sure to align the drum cartridge R1, R2, R3, or R4 with the
corresponding slot. Otherwise, the drum cartridge cannot be
inserted into the machine.
4 Cleaning bar Used for cleaning the exposure unit when density unevenness or stripes
appear on copied or printed outputs due to dirt in the exposure unit.
5 Drum cartridge cover Open this cover when replacing a drum cartridge or cleaning the interior
of the machine.
6 Drum cartridge release
lever
Unlock this lever when replacing a drum cartridge.
7 Waste toner container (R5) Collects waste toner.
8 Fuser unit (R8) Fuses toner on paper. Do not touch this unit as it is extremely hot.
No. Component Function
1 Confirmation indicator Lights up when a document is loaded correctly.
2 Lever Turn this lever to clear paper jams.
3 Left cover Open this cover to clear paper jams.
4 Inner cover Open this cover to clear paper jams.
5 Document guides Use these guides to align the edges of documents.
6 Document feeder tray Load documents here.
7 Document stopper Prevents outputs from falling off.
8 Document output tray Scanned documents are delivered here.
9 Document glass Scans a loaded document.
No. Component Function
7
12 3 5
6
8
4
9
To Next Page
Loading...
Need help?
General
