7 Scan
146
Scan
7
Using an Application to Load Scan Data from the Machine via USB
This function allows you to load scan data from a TWAIN-compatible or Windows Imaging
Acquisition(WIA)-compatible application installed on a computer. On the computer display,
you can set the scanning condition and view the scanning process on the preview screen
while scanning the document.
Note • Install the scan driver to use this function. For information on how to install the scan driver, refer to
"Installing the Scan Driver" (P.61).
• The items you can set will vary according to the TWAIN-compatible and Windows Imaging
Acquisition(WIA)-compatible applications you are using.
• The supported applications are 32-bit only.
Follow the steps below to perform the operation.
1 Place document.
Refer to "Placing Document" (P.142).
2 Start an application to scan the document.
3 Select the menu item for selecting a scanner (source).
4 Select [FX DocuCentre S2420/S2220].
5 Make advanced settings as needed.
Note • For information on the Scan
functions, click [Help] in the
screen to display Help
Information.
6 Click [Scan].
To Next Page
Loading...
Need help?
General
