Safety Notes
19
Before Using the Machine
1
Machine Installation
Once a month, switch off this product and check if
z
the power cord is plugged firmly into an electrical outlet;
z
the plug is not excessively heated, rusted or bent;
z
the plug and electrical outlet are free of dust; and
z
the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first and
contact your local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric
shock or a fire accident.
Never locate this product in the following places:
z
Near radiators or any other heat sources
z
Near volatile flammable materials such as curtains
z
In the hot, humid, dusty or poorly ventilated environment
z
In the place receiving direct sunlight
z
Near cookers or humidifiers
This product weighs 37 kg. When moving it, always carry it by a team of three or
more persons to avoid mishandling or injury.
When lifting this product, the first two persons to hold the bottom of the folded
bypass tray on the left side of the product and the third person to hold the
handhold provided on the right side of the product. Never lift it by gripping any
other areas. It will prevent you from dropping the product and getting back ache or
injuries.
Locate this product on a level and sturdy surface that can withstand its weight.
Otherwise, if tilted, the product may fall over and cause injuries.
To Next Page
Loading...
Need help?
General
