9 Tools
178
Tools
9
Default Display
The [Default Display] screen lets you change the Default Display screen. The screen is
displayed at power ON and after returning from Energy Saver mode. You can select the
[Copy] screen, [Fax] screen, or [Scan] screen as the Default Display screen.
[Copy] is set at the time of factory shipment.
Note • Some screens cannot be set on some models.
Follow the steps below to change the Default Display screen.
1 In the [Default Display] screen, select the screen
to use as the Default Display screen.
For information on how to display the [Default Display] screen,
refer to "System Settings Procedure" (P.162).
2 Press the <OK> button.
Fax
Scan
Default Display
Copy
To Next Page
Loading...
Need help?
General
