Fuji Xerox DocuCentre S2420 User Manual

9 Tools
164
Tools
9
List of Tools Menu Items Displayed in System Administration Mode
The table below lists the default settings you can change. The items displayed will vary
according to your machine's configuration.
Setting Item Description See Page:
Default Settings Used to set the default values of the setting
items shown on the control panel display.
P.168
Copy Used to set the default values of the setting
items in the Copy screen.
P.168
ID Card Copy Used to set the default values of the setting
items in the ID Card Copy screen.
P.169
Scan Used to set the default values of the setting
items in the Scan screen.
P.170
Fax Used to set the default values of the setting
items in the Fax screen.
P.171
Device Information Used to check the Product Name, Serial
Number, Printer Name, System Admin. E-mail
Address, Firmware Version, IPv4, and IPv6
settings.
P.174
Tray Settings Used to set the paper type (paper quality) in
the paper trays. Also used to set the paper
size for Paper Tray 5.
P.175
Custom Paper Size Settings Used to set non-standard paper sizes for
Customs (1 to 5) for Tray 5 (bypass).
P.176
Control Panel Language Used to set the user interface language used
in the control panel display.
P.177
Default Display Used to set the initial screen to appear in the
control panel at power ON.
P.178
Phone Book Used to create a Phone Book for the fax
transmission function.
P.179
Speed Dial Used to register and change names and fax
numbers.
P.179
Group Used to register or change groups for the
Speed Dial function.
P.181
Wired Network Used to make network environment settings. P.184
Ethernet Used to set the Ethernet environment to use. P.184
TCP/IP Used to set TCP/IP. P.184
IP Filter Used to restrict the IP addresses that can
access the machine.
P.185
Copy Settings Used to make Copy feature settings. P.187
Sharpness Used to set the sharpness level. P.187
Background Suppression Used to set whether to remove the
background of an image.
P.187
Back. Suppression Level Used to set the background suppression level. P.187
Reduce/Enlarge Preset Used to set the preset reduction/enlargement
setting.
P.187

Fuji Xerox DocuCentre S2420 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2420
Category	All in One Printer
Language	English