Fuji Xerox docucentre-v c5585 Administrator's Guide

5 Tools
176
Tools
5
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• If you set [Service Rep. Restricted Operation] to [On], our service representatives cannot change the
[Image Log Control] settings. For more information on Service Rep. Restricted Operation, refer to
"Service Rep. Restricted Operation" (P.187).
Image Log Control
Set whether or not to use the Image Log Control feature.
Image Log Target
Set whether or not to create image logs per job type such as copy, print, scan, and fax.
Image Log Generation
Set the image data to manage as an image log. One image log file (PDF format) is created
per one job.
 Assurance Level
Allows you to select an assurance level, which affects whether to surely create an image log,
from [Low] or [High].
Note • If you select [Low], image logs may not be created depending on the conditions.
 Resolution
Select the resolution of document images from [25dpi], [50dpi], [72dpi], [100dpi], or
[200dpi].
 Page Range
Select the page range of document images from [First Page Only], [First 2 Pages], [First 3
Pages], [First 4 Pages], [First 5 Pages], or [All Pages].
Transfer Image Log
Image logs created on the machine can be transferred to a log management server for
storage and management. [Transfer Image Log] allows you to set how and when to transfer
image logs.
 Log Transfer
Set whether or not to transfer an image log to a log management server with the Log
Transfer feature.
Select from [Disabled] and [Enabled].
 Assurance Level
Allows you to select an assurance level, which affects whether an image log is surely
transferred to a log management server, from [High] or [Low]. When [High] is set and if a
image log transfer fails, up to 2000 logs are saved in the machine as untransferred log.
When the number of untransferred logs saved in the machine exceeds 2000, the next job
will not be executed. While [Low] is set, the next job is executed and if the number of image
logs untransferred exceeds 2000, the logs are deleted in chronological order.
 Logs To Transfer
Set whether or not to automatically transfer image logs to a log management server.
Select from [Pause], [Transfer Per Job Basis], and [Accumulate & Transfer]. If you select
[Accumulate & Transfer], you can also select the timing of transferring in [Transfer Timing].

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English