Stapler Faults
631
Problem Solving
15
7 Slightly push the booklet staple cartridge
upward, and make sure that it clicks into place.
Note • Return the booklet staple cartridge until ( )
of the booklet staple cartridge is fitted in ( )
of the booklet unit.
8 Return the booklet unit to its original position.
9 Close the finisher front door.
Note • If the door is not closed completely, a message appears and the machine will remain paused.
If you cannot remove jammed staples even after you perform the above procedure, contact
our Customer Support Center.
Staple Jams in the Booklet Staple Cartridge for the Finisher D2-P with
Booklet Maker
The following describes how to clear staple jams in the booklet staple cartridge when the
Finisher D2-P with Booklet Maker (optional) is installed.
1 Make sure that the machine has stopped
before opening the front cover of the finisher.
2 Press the levers R2 and R3 to the right, and pull
out the unit.
To Next Page
Loading...
Need help?
General
