15 Problem Solving
618
Problem Solving
15
2 Move the levers 4b and turn the knob 3a to the
right. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
3 Return the lever 4b to the original position.
4 Close the finisher right cover.
Note • A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
Paper Jams at the Lever 2a and the Knob 3a when D2 Folder Unit is Installed
1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2 Move the lever 2a and turn the knob 3a to the
left. Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
To Next Page
Loading...
Need help?
General
