Fuji Xerox docucentre-v c5585 Administrator's Guide

Connectivity & Network Setup
223
Tools
5
 Attribute Type of Custom Items 1, 2, and 3
Set the LDAP attribute type of custom items 1 to 3. In addition to [Attribute Type of Name]
and [Attribute Type of E-mail Address], you can assign user attributes registered on the
LDAP server for a search. Up to 32 characters are allowed.
 Attribute Name of Custom Items 1, 2, and 3
Set the attribute names assigned to custom items 1 to 3. Up to 16 single-byte characters are
allowed.
Note • To encrypt communications using this feature, a trusted root certificate authority and all
intermediate certificate authorities that are registered in the path of a certificate to use must be
registered.
 Attribute Type of Certificate
Set the certificate attribute type. Select and enter the field name to use as a certificate from
among the user information registered on the LDAP server. Up to 32 single-byte characters
are allowed.
For Windows, enter "userCertificate;binary" for an attribute name used as certificate
information. The information is used as an S/MIME certificate when you specify an address
using the directory service to encrypt e-mail transmission by S/MIME.
Note • To encrypt communications using this feature, a trusted root certificate authority and all
intermediate certificate authorities that are registered in the path of a certificate to use must be
registered.
 Maximum Number of Search Results
Set a maximum number of address to display from search results from 5 to 100. If the
search results exceed the maximum, the search stops at the maximum number set. The
default value is 50.
 Search Time-Out
Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1
second increments.
SMB Server Settings
Set the following items to use SMB server as a remote authentication server.
 SMB Server Setup
Select the server specification method from [By Domain Name] and [By Domain & Server
Names/IP Address].
According to the option you selected here, set [Domain Name] and [Server Name/IP
Address] for SMB servers 1 to 5 respectively. The setting for SMB server 1 is used as the
default setting for authentication.
 Domain Name
Enter the domain name of the server. Up to 64 characters are allowed.
This setting is mandatory regardless of the SMB server specification method selected for
[SMB Server Setup].
Important • Use the NetBIOS or Active Directory domain name for the domain name.
 Server Name/IP Address
Enter the server name or IP address.
This setting is valid when [SMB Server Setup] is set to [By Domain & Server Names/IP
Address].
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server name.

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English