Fuji Xerox docucentre-v c5585 Administrator's Guide

5 Tools
198
Tools
5
The larger the value, the stronger the effect of removing background noise.
Background Suppression Level (Text)
Set the background suppression level for color copying. This setting is valid when [Text] is
selected for [Original Type] in the [Image Quality] screen.
The larger the value, the stronger the effect of removing background noise.
Photo & Text /Printed Original
Set the type of document when [Printed Original] of [Photo & Text] is selected for [Original
Type] in the [Image Quality] screen.
 Normal
Copies with standard image quality.
 Inkjet Originals
Select [Inkjet Originals] when copying a document printed with an inkjet printer. This
improves the recognition of inkjet colors.
 Highlighted Originals
Select [Highlighted Originals] when copying an original marked with a highlight pen. This
improves the recognition of the colors of highlight pen.
Original Type - See-Through Paper
When [Text] is selected for [Original Type] in the [Image Quality] screen, set whether or not
to display [Text on See-Through Paper].
Face Up/Down Output - Reverse Order
Set whether or not to display [Face Up (Reverse Order)] under [Face Up/Down Output] in the
[Output Format] screen.
Face Up/Down - Auto (Single Sheet)
Specify the operation of the machine when [Face Up/Down Output] is set to [Auto] in the
[Output Format] screen, and a single sheet is output.
Auto Image Positioning - Below 105 gsm
Set the value for auto image positioning when you use 105 gsm or light paper. When you
set auto image positioning, the machine adjusts the image shifting so that the printing
positions on the inner and outer pages of a booklet remain consistent when they are folded.
Specify the value between 0 and 1.50 mm.
Auto Image Positioning - Above 106 gsm
Set the value for auto image positioning when you use 106 gsm or heavier paper. When you
set auto image positioning, the machine adjusts the image shifting so that the printing
positions on the inner and outer pages of a booklet remain consistent when they are folded.
Specify the value between 0 and 1.50 mm.
Annotations - Comment Density
Set the translucency of the comment printed as annotation.
You can select a translucency value from [Darken], [Normal], and [Lighten]. Darken
represents no translucency.
Note • If a stamp set to [Darken] density is printed over text, the text may be unreadable.

Fuji Xerox docucentre-v c5585 Specifications

General

Brand	Fuji Xerox
Model	docucentre-v c5585
Category	All in One Printer
Language	English