EasyManuals Logo
Home>Fuji Xerox>All in One Printer>docucentre-v c5585

Fuji Xerox docucentre-v c5585 Administrator's Guide

Fuji Xerox docucentre-v c5585
797 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #587 background imageLoading...
Page #587 background image
Error Code
587
Problem Solving
15
127-310
127-311
127-312
127-313
127-314
127-315
127-320
127-337
127-342
127-353
127-354
127-396
127-398
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
127-399
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, turn off the machine
once, then turn the machine on holding down both the <Start> and <Stop> buttons
simultaneously for six seconds. This deletes the print data that caused the error. If the
error still is not resolved, contact our Customer Support Center.
127-700
[Cause] The SIP registrar server cannot be used.
[Remedy] Check if the SIP registrar server is available. Also, confirm that [SIP Registrar Server
Setup] is set correctly under [Tools].
133-210
133-211
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
133-226
[Cause] A country code not supported by the machine was specified.
[Remedy] Contact our Customer Support Center.
133-280
133-281
133-282
133-283
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
133-701
[Cause] Unavailable characters are included in Name, Company Logo, Fax Comment, or Local
Name and the characters are converted.
[Remedy] Enter available characters to Name, Company Logo, Fax Comment,or Local Name.
When the available characters are not clear, enter alphanumeric characters only.
Error Code Cause and Remedy

Table of Contents

Other manuals for Fuji Xerox docucentre-v c5585

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox docucentre-v c5585 and is the answer not in the manual?

Fuji Xerox docucentre-v c5585 Specifications

General IconGeneral
BrandFuji Xerox
Modeldocucentre-v c5585
CategoryAll in One Printer
LanguageEnglish

Related product manuals